Nickel Copper Alloy Monel 400 Strips

IntroductionMonel 400 is a nickel-copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a solid solution

Featured Products


Introduction
Monel 400 is a nickel-copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, Monel 400 is rapidly attacked by nitric acid and ammonia systems.

Typical Uses and Applications
Monel 400 is widely used in many fields, especially marine and chemical processing. Typical applications
are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic
components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills,
process vessels and piping; boiler feedwater heaters and other heat exchangers; and deaerating heaters.

Product Details
Chemical composition:
GradeNi%Cu%Fe%C%Mn%Si%S%
Monel 400Min 6328-34Max 2.5Max 0.3Max 2.0Max 0.5Max 0.024
Specifications:
Grade UNSWerkstoff Nr.
Monel 400N0 44002.4360
Physical Properties:
GradeDensityMelting Point
Monel 4008.83g/cm31300°C-1390°C
Mechanical Properties: 
    GradeTensile StrengthYield Strength  Elongation
    Monel 400480 N/mm²170 N/mm² 35%
 
Available Specifications:
Pipe SmlsPipe WeldedTube SmlsSheet/PlateBarForgingFitting
B165B725B163B127B164B564B366
 
Available forms:
Monel 400 wire, bar, rod, strip, forging, plate, sheet, tube, fastener and other standard forms are available.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours