Nickel base alloy Inconel 625 2.4856 Ns336 high temperature alloy steel plate

Product DescriptionAlloy 625 (NF NC22DNb,W.Nr.2.4856,UNS NO6625)is a nonmagnetic, corrosion - and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium

Featured Products

Product Description

Alloy 625 (NF NC22DNb,W.Nr.2.4856,UNS NO6625)is a nonmagnetic, corrosion - and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware, and special seawater applications.

TYPICAL SPECIFICATION PACKAGES

UNS-N-06625

WERKSTOFF 2.4856

PLATE:AMS 5599, ASTM-B-443, ASME-SB-443 BAR: AMS 5666, ASTM-B-446, ASME-SB-446

SHEET:AMS 5599, ASTM-B-443, ASME-SB-443

BAR:AMS 5666, ASTM-B-446, ASME-SB-446
ASME SB-166 Inconel 601 round bar

 UNS N06601 Nickel alloy inconel 601 rod has good high temperature strength,good hot corrosion resistance under oxidzing conditions.

 UNS N06601 Nickel alloy inconel 601 rod is usd for industrial fur-naces,heat-treating equipment such as baskets,muffles,and retorts; Solid waste incinerator combustion chamber ;petrochemical and other processequipment ;and gas-turbine components.   

Chemical Composition:  

 

Grade

 

 

%

 

Ni

 

Cr

 

Fe

 

C

 

Mn

 

Si

 

Cu

 

Al

 

p

 

s

 

601

Min

58

21

 

Bal.

    

1.0

  

Max

63

25

0.1

1.5

0.5

1

1.7

0.02

0.015

Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.

Chemical Composition of Inconel 600

Element

Content

Nickel (Ni)

72 % min

Chromium (Cr)

14 - 16 %

Iron (Fe)

6 - 10 %

Typical Properties of Inconel 600

Typical properties of 

Inconel 600 are covered in the following table.

Property

Metric

Imperial

Density

8.47 g/cm3

0.306 lb/in3

Melting point

1413 °C

2575°F

Co-Efficient of Expansion

13.3 µm/m.°C
(20-100°C)

7.4x10-6 in/in.°F
(70-212 °F)

Modulus of rigidity

75.6 kN/mm2

10965 ksi

Modulus of elasticity

206 kN/mm2

29878 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply

Heat Treatment (After Forming)

Annealed/Spring Temper

Stress relive at 460°C (860°F) for 1hr and air cool.

Condition

Approx Tensile Strength

Approx Service Temp.

Annealed

600-750 N/mm2

87-109 ksi

-200 to +330°C

-330 to +625°F

Spring Temper

900-1250 N/mm2

131-181 ksi

-200 to +330°C

-330 to +625°F

Note - In both cases slight magnetism may occur below -120°C (-184°F)

Relevant Standards

Inconel 600 is covered by the following standards:

•         BS 3075 and BS 3076 NA 14

•         AMS 5687

•         ASTM B166

Equivalent Materials

•         W.NR 2.4816

•         UNS N06600

•         AWS 010


Soft Magnetic Alloys Permalloy are ferromagnetic materials that have little or no retentivity. They are magnetized in a magnetic field and when removed from the field, they lose most, if not all, of the magnetism they exhibited while in the filed. Chinese 1J46/1J50/1J77/1J79/1J85 with High Permeability Alloy is one such Nickel-Iron Soft Magnetic Alloy offered by Haixiang.

 Grade & Chemical Composition 

Sort

Grade

Chemical Composition (%)

C≤

P≤

S≤

Mn

Si

Ni

Cr

Co

Mo

Cu

Fe

High magnetic conductivity higher saturation magnetic flux density soft magnetic alloy

1J46

0.03

0.020

0.02

0.60∼1.1

0.15∼0.3

45.0∼46.5

   

≤0.20

Bal.

1J50

0.30∼0.6

0.15∼0.3

49.0∼50.5

   

≤0.20

1J54

0.30∼0.6

1.10∼1.40

49.0∼51.0

3.80∼4.2

  

≤0.20

High initial permeability of soft magnetic alloy

1J76

0.30∼0.60

0.15∼0.3

75.0∼76.5

1.80∼2.2

  

4.80∼5.2

1J77

0.30∼0.60

0.15∼0.3

75.0∼78

  

3.9∼4.5

4.80∼6

1J79

0.60∼1.1

0.30∼0.50

78.5∼80.0

  

3.80∼4.10

≤0.20

1J80

0.60∼1.1

1.10∼1.5

79.0∼81.0

2.6∼3.0

  

≤0.20

1J85

0.03

0.020

0.02

0.30∼0.60

0.15∼0.3

79.0∼81.0

  

4.80∼5.20

≤0.20

1J86

≤1.00

≤0.30

80.5∼81.5

  

5.80∼6.2

 

Moment magnetic alloy

1J34

0.30∼0.60

0.15∼0.30

33.5∼35.0

 

28.5∼30

2.80∼3.2

≤0.20

1J51

0.30∼0.60

0.15∼0.30

49.0∼50.5

   

1J52

0.30∼0.60

0.15∼0.30

49.0∼50.5

  

1.80∼2.2

1J65

0.30∼0.60

     
       
       
       

 

Nickel Based Alloy Inconel 625 2.4856 Ns336 High Temperature Alloy Steel Sheet Plate
Nickel Based Alloy Inconel 625 2.4856 Ns336 High Temperature Alloy Steel Sheet Plate
Nickel Based Alloy Inconel 625 2.4856 Ns336 High Temperature Alloy Steel Sheet Plate

Nickel Based Alloy Inconel 625 2.4856 Ns336 High Temperature Alloy Steel Sheet Plate
Nickel Based Alloy Inconel 625 2.4856 Ns336 High Temperature Alloy Steel Sheet Plate

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours
ascript" src="//form.grofrom.com/livechat.js">