Nickel base alloy Gh4145 N07750 Inconelx750 high temperature alloy steel round flat steel wire

Product Description  NameGH4145 / N07750 inconel x750 MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel AlloyShapeRound,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,SheetGradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904LO

Featured Products

Product Description 

 NameGH4145 / N07750 inconel x750 
MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
ShapeRound,Forging,Ring,Coil,Flange,Disc,Foil,Spherical,Ribbon,Square,Bar,Pipe,Sheet
GradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
Others: 253Ma,254SMo,654SMo,F50(UNS S32100)F60,F61,F65,1J22,N4,N6 etc
Alloy : Alloy 20/28/31;
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;

Hastelloy B / UNS N10001,Hastelloy B-2 / UNS N10665 / 

DIN W. Nr. 2.4617,Hastelloy C,Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610,Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602,Hastelloy C-276 / 

UNS N10276 / DIN W. Nr. 2.4819,Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665

Haynes: Haynes 230/556/188;
Inconel Series:
Inconel 600/601/602CA/617/625/713/718/738/X-750,Carpenter 20;
Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668,Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851,
Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856,Inconel 725 / UNS N07725,Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669,Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816
Incoloy: Incoloy 800/800H/800HT/825/925/926;
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
Monel: Monel 400/K500/R405
Nitronic: Nitronic 40/50/60;
Nimonic: Nimonic 75/80A/90/A263 ;
SpecificationWire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm 
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product 
Characteristics
1.According to the preparation process can be divided into deformation superalloys, 
casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation 
strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
StandardGB,AISI,ASTM,DIN,EN,SUS,UNS etc
InspectionISO,SGS,BV and so on.
ApplicationHigh temperature components such as turbine blades, guide vanes, turbine disks, high pressure 
compressor disks,machine manufacturing
and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines
Packaging1. cases packed in wooden cases
2. paper packaging
3. plastic packing
4. foam packaging
Packaging according to customer requirements or products
Delivery7-25days or according to the product
PaymentL/C,T/T,According to customer requirements payments
for offline orders.

 


Incoloy 825 Alloy

Incoloy 825 is a nickel-iron-chromium alloy that provides high strength and excellent resistance to oxidation and carburization at high temperatures. It also offers excellent corrosion resistance in many aqueous environments.

Incoloy series:800,800H,800HT,825

Wire: 0.01-10mm 

Strip: 0.05*5.0-5.0*250mm 

Bar: φ4-50mm;Length 2000-5000mm

Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm

Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm 

Workability performance  Incoloy 825 Alloy

825 is an all-purpose project alloy, have good corrosion resistance of the acid and alkali metal property in both oxidation and reduction environments. High nickel content made it with effective stress corrosion cracking resistance performance. 825 have excellent corrosion resistance in different kinds of media, such as sulfuric acid, phosphoric acid, nitric acid and organic acid, alkali metal such as sodium hydroxide, potassium hydroxide, and hydrochloric acid. A variety of media corrosion of nuclear-burning dissolver show 825 high integrated prpperty, like sulfuric acid, nitric acid and potassium hydroxide are all dealing in a same device. 
Alloy C-276 / UNS N10276 / W.Nr. 2.4819

Alloy C-276 is a solid solution strengthened nickel-molybdenum-chromium alloy with a small amount of tungsten. Alloy C-276 exhibits excellent corrosion resistance in a variety of harsh environments and media. Like many other nickel alloys, it is ductile, easily formed and welded. This alloy is used in most industrial settings where aggressive chemical environments are present and other alloys have failed.

Industries and Applications

Alloy C-276 is frequently used in many industries, including chemical and petrochemical processing, oil and gas, power generation, pharmaceutical, pulp and paper production and waste water treatment. End use applications include stack liners, ducts, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction vessels, evaporators, transfer piping and many other highly corrosive applications.

Resistance to Corrosion

Alloy C-276 is one of the most universally corrosion resistant alloys available today. It is used in a variety of environments ranging from moderately oxidizing to strong reducing conditions. Alloy C-276 has exceptional resistance to sulfuric acid, hydrochloric acid, formic acid, acetic acid, chlorides, solvents, wet chloride gas, hypochlorite and chlorine solutions. Alloy C-276 has excellent resistance to phosphoric acid at all temperatures below boiling and concentrations lower than 65%. The limiting factor when dealing with strong oxidizing environments is the low chromium content, which means hot concentrated nitric acid environments are not desirable.

Alloy C-276 has superior resistance to pitting, stress corrosion cracking and oxidizing atmospheres. Alloy C-276 also exhibits resistance to corrosion by seawater in crevice conditions, which can induce aggressive attack in other commonly used materials.

Fabrication and Heat Treatment

Alloy C-276 can be formed using various cold and hot working processes. Like other nickel alloys, alloy C-276 work hardens quickly, though it can be cold formed using aggressive methods like deep drawing, press forming and punching. Hot forming should be performed within a temperature range between 1600°F and 2250°F (870°C and 1230°C) with heavier sections being heated to a minimum temperature of 2000°F before forming. Annealing of the material after working is advised and should be performed at a temperature between 2050°F and 2150°F, followed by a rapid quench in a protective atmosphere or agitated reducing quench bath. To obtain a reducing quench bath, add 2% (by volume) of either ethyl or propyl alcohol to water.

Common Trade Names

INCONEL® alloy C-276, Hastelloy® C-276 alloy

INCONEL® is a registered trademark of the Special Metals Corporation group of companies. HASTELLOY® is a registered trademark of Haynes International Inc.

Alloy 625 (NF NC22DNb,W.Nr.2.4856,UNS NO6625)is a nonmagnetic, corrosion - and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware, and special seawater applications.

TYPICAL SPECIFICATION PACKAGES

UNS-N-06625

WERKSTOFF 2.4856

PLATE:AMS 5599, ASTM-B-443, ASME-SB-443 BAR: AMS 5666, ASTM-B-446, ASME-SB-446

SHEET:AMS 5599, ASTM-B-443, ASME-SB-443

BAR:AMS 5666, ASTM-B-446, ASME-SB-446
ASME SB-166 Inconel 601 round bar

 UNS N06601 Nickel alloy inconel 601 rod has good high temperature strength,good hot corrosion resistance under oxidzing conditions.

 UNS N06601 Nickel alloy inconel 601 rod is usd for industrial fur-naces,heat-treating equipment such as baskets,muffles,and retorts; Solid waste incinerator combustion chamber ;petrochemical and other processequipment ;and gas-turbine components.   

Chemical Composition:  

 

Grade

 

 

%

 

Ni

 

Cr

 

Fe

 

C

 

Mn

 

Si

 

Cu

 

Al

 

p

 

s

 

601

Min

58

21

 

Bal.

    

1.0

  

Max

63

25

0.1

1.5

0.5

1

1.7

0.02

0.015

Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.

Chemical Composition of Inconel 600

Element

Content

Nickel (Ni)

72 % min

Chromium (Cr)

14 - 16 %

Iron (Fe)

6 - 10 %

Typical Properties of Inconel 600

Typical properties of 

Inconel 600 are covered in the following table.

Property

Metric

Imperial

Density

8.47 g/cm3

0.306 lb/in3

Melting point

1413 °C

2575°F

Co-Efficient of Expansion

13.3 µm/m.°C
(20-100°C)

7.4x10-6 in/in.°F
(70-212 °F)

Modulus of rigidity

75.6 kN/mm2

10965 ksi

Modulus of elasticity

206 kN/mm2

29878 ksi

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply

Heat Treatment (After Forming)

Annealed/Spring Temper

Stress relive at 460°C (860°F) for 1hr and air cool.

Condition

Approx Tensile Strength

Approx Service Temp.

Annealed

600-750 N/mm2

87-109 ksi

-200 to +330°C

-330 to +625°F

Spring Temper

900-1250 N/mm2

131-181 ksi

-200 to +330°C

-330 to +625°F

Note - In both cases slight magnetism may occur below -120°C (-184°F)

Relevant Standards

Inconel 600 is covered by the following standards:

•         BS 3075 and BS 3076 NA 14

•         AMS 5687

•         ASTM B166

Equivalent Materials

•         W.NR 2.4816

•         UNS N06600

•         AWS 010


Soft Magnetic Alloys Permalloy are ferromagnetic materials that have little or no retentivity. They are magnetized in a magnetic field and when removed from the field, they lose most, if not all, of the magnetism they exhibited while in the filed. Chinese 1J46/1J50/1J77/1J79/1J85 with High Permeability Alloy is one such Nickel-Iron Soft Magnetic Alloy offered by Haixiang.

 Grade & Chemical Composition 

Sort

Grade

Chemical Composition (%)

C≤

P≤

S≤

Mn

Si

Ni

Cr

Co

Mo

Cu

Fe

High magnetic conductivity higher saturation magnetic flux density soft magnetic alloy

1J46

0.03

0.020

0.02

0.60∼1.1

0.15∼0.3

45.0∼46.5

   

≤0.20

Bal.

1J50

0.30∼0.6

0.15∼0.3

49.0∼50.5

   

≤0.20

1J54

0.30∼0.6

1.10∼1.40

49.0∼51.0

3.80∼4.2

  

≤0.20

High initial permeability of soft magnetic alloy

1J76

0.30∼0.60

0.15∼0.3

75.0∼76.5

1.80∼2.2

  

4.80∼5.2

1J77

0.30∼0.60

0.15∼0.3

75.0∼78

  

3.9∼4.5

4.80∼6

1J79

0.60∼1.1

0.30∼0.50

78.5∼80.0

  

3.80∼4.10

≤0.20

1J80

0.60∼1.1

1.10∼1.5

79.0∼81.0

2.6∼3.0

  

≤0.20

1J85

0.03

0.020

0.02

0.30∼0.60

0.15∼0.3

79.0∼81.0

  

4.80∼5.20

≤0.20

1J86

≤1.00

≤0.30

80.5∼81.5

  

5.80∼6.2

 

Moment magnetic alloy

1J34

0.30∼0.60

0.15∼0.30

33.5∼35.0

 

28.5∼30

2.80∼3.2

≤0.20

1J51

0.30∼0.60

0.15∼0.30

49.0∼50.5

   

1J52

0.30∼0.60

0.15∼0.30

49.0∼50.5

  

1.80∼2.2

1J65

0.30∼0.60

     
       
       
       

 

Nickel Based Alloy Gh4145 N07750 Inconelx750 High Temperature Alloy Steel Round Flate Wire Bar
Nickel Based Alloy Gh4145 N07750 Inconelx750 High Temperature Alloy Steel Round Flate Wire Bar
Nickel Based Alloy Gh4145 N07750 Inconelx750 High Temperature Alloy Steel Round Flate Wire Bar

Nickel Based Alloy Gh4145 N07750 Inconelx750 High Temperature Alloy Steel Round Flate Wire Bar
Nickel Based Alloy Gh4145 N07750 Inconelx750 High Temperature Alloy Steel Round Flate Wire Bar

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours