431 die steel plate has high quenching, hardening and other technological properties

 431  Mould steel plate  which has high quenching, hardening and other process propertiesDescription431  Mould steel plate  which has high quenching, hardening and other process propertiesMold steel is used to make cold die mold, hot forging mold, die mold and other mold strains of steel. Mold is the mai

Featured Products

 431  Mould steel plate  which has high quenching, hardening and other process properties
Description
431  Mould steel plate  which has high quenching, hardening and other process properties
Mold steel is used to make cold die mold, hot forging mold, die mold and other mold strains of steel. Mold is the main processing tool for manufacturing parts in the industrial sectors of machinery manufacturing, radio instrumentation, electric motors, electrical appliances and so on. The quality of the mold directly affects the quality of the pressure processing process, the precision yield of the product and the production cost, and the quality and service life of the mold are mainly affected by the mold material and heat treatment, in addition to the reasonable structural design and processing precision.
 431 Mould Steel Plate Which Has High Quenching, Hardening and Other Process Properties

Chemical Composition (%)

C

Si

Mn

P

S

Ni

Cu

Al

Mo

0.06
0.20


0.35

1.40
1.70


0.030


0.030

2.80
3.40

0.80
1.20

0.70
1.30

0.20
0.50


 
Dimensions

Thickness (mm)

Width (mm)

Length (mm)

20-160

2000-2300

3000-5800

47 sets of Vertical Band Saw
Strong cutting capacity!!! Monthly 250tons per set
We guarantee a prompt delivery time
We cut and machine the steel plate as your required sizes
P20+Ni is recommended for the Blocks thickness over 450mm


 
Delivery Condition
EAF+LF+VD+ESR, Hot Rolled, Unmachined or Machined surface, Q+T, Hardness 38-42HRC, UT 100% Passed
 
Characteristics
Low alloyed Presipitation hardening steel, with good comprehensive mechanical properties, high hardenability, convenient heat treatment, small deformation after heat treatment, good polishability. This material also has good nitriding, electrical machining, welding, and pattern marking performation.
 
Applications
Making high polishing plastic moulds, or moulds of household applicance which requires high surface condition.
 
Forging Technique

Heat
Temperature

Start Forging
Temperature

Finish Forging
Temperature

Cooling Method

1120-1160°C

1080-1120°C

>=850°C

Air Cooling

 

Tool steel is the steel used to make cutting tools, measuring tools, molds and wear-resistant tools. Tool steel has high hardness and can maintain high hardness and red hardness at high temperature, as well as high wear resistance and appropriate toughness. Tool steel is generally divided into carbon tool steel, alloy tool steel and high-speed tool steel.Tool steel has good wear resistance, that is, the ability to resist wear. The tool can keep its shape and size unchanged under the conditions of considerable pressure and friction.
Process parameters
High-speed tool steel is also an alloy tool steel, which contains C, Mn, Si, Cr, V, W, Mo, Co. And it can be used to make high-speed rotary cutting tools, wear-resistant, high temperature resistant, which is Cr, The ratio of V, W and Mo is relatively large. Take W12Cr4V5Co5 as an example, Cr-> 3.75% -5%, V-> 4.5% -5.25%, W-> 11.75% -13%. The ratio of Cr and V should not be low Less than 3%. The content of P and S shall not exceed 0.030%.

The processing method of alloy tool steel is mainly pressure processing steel and cutting tool steel. There are many types of alloy tool steel, including cold work, hot work, non-magnetic, plastic mold steel, etc. At the same time, the ratio of Cr and V must not be too low. Selection of tool steel for cold work die

The choice of tool steel for cold work molds is based on the main failure mechanism of the mold in practical use. It is not enough to choose tool steel to have only knowledge of steel properties. It must also consider factors such as the number of parts produced, the type of material being processed, thickness, and hardness. A basic method of selecting tool steel is to first eliminate all the failure mechanisms except for wear, and then select the tool steel with the most suitable wear resistance to meet the production requirements.

431 Mould Steel Plate Which Has High Quenching, Hardening and Other Process Properties



What we can offer?
 
We offer a wide range of steel products in a wide variety of dimensions and executions, acc.to the common international specifications or customerized.
Machining and heat treatment are available.
Also, we advise you in choosing the right materials.
 
Shape Available
Solid round bar
Flat bar
Square bar
Hexagon bar
Block
Plate
Sheet
Wire rod
Strip

 

 

AISI

DIN

JIS

Stock

Application

Hot Work Tool Steel

H11

1.2343

SKD6

Die Casting Dies,Extrusion Dies, Hammer Dies,
Ram Dies,
Forging Dies
etc.

H13

1.2344

SKD61

H10

1.2365

SKD7

 

--

1.2367

--

 

L6

1.2714 / 1.2713

SKT4

H12

1.2606

SKD62

 

H21

1.2581

SKD5

Cold Work Tool Steel

D3

1.2080

SKD1

Cutting Tools, Punching Tools, Shear Bladers, Reamers, Thread Rolling Dies, Calipers, Sockets etc.

--

1.2601

~SKD11

D2

1.2379

~SKD11

--

1.2379 MOD

DC53 (Daido)

D6

1.2436

--

 

O1

1.2510

SKS3

O2

1.2842

--

 

A2

1.2363

SKD12

 

S1

1.2550

--

 

S7

1.2357

--

 

--

1.2767

SKT6

 

L2

1.2210

--

 

Plastic
Mould Steel

P20

1.2311

--

      Mold Base,           Core & Cavity,         Bumper Mold             etc.         

P20+Ni

1.2738

--

P20+S

1.2312

--

--

1.2316

--

 

420

1.2083

SUS420J2

--

--

NAK80 (Daido)

Alloy Steel

4120

25CrMo4 / 1.7218

SCM420

 

Shafts, Gears, Drillers, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Crankshafts, Connecting Rods, Came, Couplings  etc.

4135

34CrMo4 / 1.7220

SCM435

 

4130

34CrMo4 / 1.7220

SCM430

4140

   42CrMo4 /        42CrMoS4 /                1.7225             

SCM440

4142

41CrMo4 / 1.7223

SCM440

 

4145H

--

--

 

4330V

--

--

 

4340

34CrNiMo6 / 1.6582

SNCM439

 

5115

16MnCr5 / 16MnCrS5 / 1.7131

 

 

5120

20MnCr5 / 20MnCrS5 / 1.7147

SMnC420H

 

5140

41Cr4 / 41CrS4 / 1.7035

SCr440

8620

21NiCrMo2 / 1.6523

SNCM220

 

8640

40NiCrMo2-2 / 1.6546

SNCM240

 

--

18CrNiMo7-6 / 17CrNiMo6 / 1.6587

--

 

9840

36CrNiMo4 / 1.6511

--

 

E71400

41CrAlMo7-10 / 1.8509

SACM1

 

--

34CrAlNi7 / 1.8550

--

 

Bearing Steel

E52100

100Cr6 / 1.3505

SUJ2

Bearing, Shafts
etc.

--

100CrMn6 / 1.3520

--

 

--

100CrMo7-3 / 1.3536

--

 

Spring Steel

5155

55Cr3 / 1.7176

SUP9

 

Springs

6150

51CrV4 / 1.8159

SUP10

 

9261

60CrSi7 / 1.7108

--

 

Carbon Steel

1010

CK10 / C10E / 1.1121

S10C

 

Shafts, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Came, Couplings  etc.

1020

C22 / 1.0402

S20C

1040

CK40 / C40E / 1.1186

S40C

1045

CK45 / C45E / 1.1191

S45C

1050

CK50 / C50E / 1.1206

S50C

1055

CK55 / C55E / 1.1203

S55C

 

1064

CK60 / C60E / 1.1221

S58C

 

High Speed Tool Steel

M2

1.3343

SKH51

Reamer,
      End-mill,         
Hob, Cutter, Bite, Drill, Punch, Tap, Brooch
etc.

M7

1.3348

--

 

M42

1.3247

SKH59

M35

1.3243

SKH55

T1

1.3355

SKH2

 

T15

1.3202

--

 

T42

1.3207

SKH57

 

 
Note:
1). √ means we have stoc
2). Delivery Condition:
Smelting: EAF+LF+VD (+ESR)
Making: Hot rolled, Cold rolled, Forged, Cold Drawn
Heat Treatment: Untreated, Annealing, N+T, Q+T
Surface: Black, Peeled, Turned, Milled, Grinded, Polished
 
Packing & Shipping
Hot keywords:high quality


Our company
431 Mould Steel Plate Which Has High Quenching, Hardening and Other Process Properties

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours